Si tienes una antena de TV, puedes conectarla a tu Xumo TV para ver canales de transmisión en vivo.
Note: Xumo TV does not support QAM (cable input), you must use an antenna.
When you first set-up your TV, you'll be prompted to connect an antenna if you have one. Si eliges esta opción, obtendrás instrucciones paso a paso en la pantalla de tu televisor.
Para conectar una antena después de haber configurado el televisor:
- Plug your antenna into your TV’s Antenna port
- Follow the manufacturer’s instructions about where to place your antenna for the best signal
- Turn on your TV (if it is off)
- Navigate to Settings > Antenna and inputs > Antenna and choose Scan for channels
- Follow the on-screen instructions, then select Scan for channels
- Espera mientras tu televisor busca canales; esto puede demorar varios minutos
- When the channel scan is finished, you’ll see the number of channels that were found
- Select Continue
For more help setting up your TV, please reference the Xumo TV user manual and Quick Start Guide for your TV manufacturer here.
¿Cómo veo los canales que recibo con mi antena?
Hay cuatro opciones:
Botón Input de tu control remoto
- Press INPUT on your remote
- Navigate to the Antenna tile
- Press SELECT to bring up the grid guide
Botón(Botones) numérico(s) del control remoto
Si tu control remoto tiene botones numéricos y sabes el número de la cadena de televisión que deseas ver:
- Press a number button on the remote
- Keep pressing number buttons until you have the full channel number entered, or use DPAD to select from the list
- Press SELECT to tune to the channel
Comandos de voz
- Press the “Microphone” button on your remote
- Say “Antenna” or “Grid guide” to navigate to the grid guide OR
- Say the name of a TV station (ex: “NBC Ten” or “CBS Three”) to be taken directly to that channel
Botón de encendido del panel
- Press the power button on your TV panel
- Press it again to scroll through the input list until Antenna is highlighted
- Espera 3 segundos