You can connect external devices, such as a media player or game console, using HDMI, composite connections, USB, or an antenna.
Connect another device
Connect an external device to your Xumo TV and switch to the correct input to start using it.
How to connect another device
- Connect your device using the appropriate input on the back of the TV.
- Press the Input button on your remote.
- Select the input your device is connected to (composite, media player, etc.) with the directional pad and it will search for the signal.
- If you’re not seeing a signal, check your device’s connections or switch inputs
- For a composite connection, ensure the cables are matched: yellow for video and red/white for stereo audio
For more help setting up your TV and connecting it to your other devices, please reference the Xumo TV user manual and support page for your TV manufacturer.
Connect an antenna
Si tienes una antena de TV, puedes conectarla a tu Xumo TV para ver canales de transmisión en vivo.
How to connect your TV antenna
Note: Xumo TV does not support QAM (cable input), you must use an antenna.
To connect an antenna:
- Plug your antenna into your TV’s Antenna port.
- Follow the manufacturer’s instructions about where to place your antenna for the best signal.
Watch channels with an antenna
Xumo TVs support over-the-air channels through an antenna connection. The steps to access and scan for channels vary slightly depending on which version of the Xumo TV interface you have. Before you begin, identify your version so you can follow the correct steps below.
Watch antenna channels
```
Xumo TV version
There are two ways to identify your version:
- Presiona la
button on your remote or scroll down to the Settings tile on your home screen.
- If the first item in the Settings menu is Closed captions, select the Berry tab.
- If the first item in the Settings menu is Picture and sound, select the Teal tab.
- Look for one of the following logos in the top-left corner of your TV screen:
-
If you see this logo, select the Berry tab.
-
If you see this logo, select the Teal tab.
Berry
Launching the Antenna input
You can launch the Antenna input using one of the following three options:
A. Using the remote
- Press the Input button on your remote.
- Scroll to the right and select the Antenna tile.
B. Using a voice command
- Mantén presionado el
botón en tu control remoto.
- Say “Antenna” or "TV input."
C. Using the power button on the TV
- Press the Power button on your TV panel.
- Press it again to scroll through the input list until Antenna is highlighted.
- Wait three seconds.
Scanning for channels
When you first launch the Antenna input, follow the on-screen instructions and scan for channels:
- Wait while your TV scans for channels – this can take several minutes.
- When the channel scan is finished, you’ll see the number of channels that were found.
- When the scan is complete, select Continue.
Note: Once the scan is complete, you can use the Direct tune to channels section below to jump to a specific channel. If you need to search for new channels later, see the Rescan for channels section.
Teal
Launching the Antenna input
You can launch the Antenna input using one of the following three options:
A. Using the remote
- Press INPUT on your remote.
- Select the Antenna tile.
B. Using the Home Screen
- Press the Home button on your remote.
- Select the Apps and inputs (view all) tile.
- Use the navigation pad on your remote to scroll down to Inputs > Antenna.
Note: The Inputs option inside the Apps & Inputs tile is only visible if you haven’t used the Manage Apps feature to customize your apps list.
C. Using a voice command
- Mantén presionado el
- Say “Antenna.”
Scanning for channels
When you first launch the Antenna input, follow the on-screen instructions and scan for channels:
- Wait while your TV scans for channels – this can take several minutes.
- When the channel scan is finished, you’ll see the number of channels that were found.
- When the scan is complete, select Continue.
Note: Once the scan is complete, you can use the Direct tune to channels section below to jump to a specific channel. If you need to search for new channels later, see the Rescan for channels section.
Rescan for channels
If you need to rescan for channels later (e.g., if you moved your antenna), follow these steps:
- Open the Antenna input
- Press DPAD right
- Scroll to Settings
- Select Channel setup
- Select Antenna
- Select Search
Direct tune to channels with the number button(s) on your remote
Si tu control remoto tiene botones numéricos y sabes el número de la cadena de televisión que deseas ver:
- Launch the Antenna input (per steps above).
- Press a number button on the remote.
- Keep pressing number buttons until you have the full channel number entered, or use the navigation pad on your remote to select from the list.
- Press OK to tune to the channel.
¿Necesitas más ayuda?
Chat Now with a Xumo agent by clicking the chat bubble. Support is available 24/7.